acousticplayer.blogspot.com
Acousticplayer: Maple Guitar Project (Stratocaster)
http://acousticplayer.blogspot.com/2010/05/maple-guitar-project-stratocaster.html
Monday, May 31, 2010. Maple Guitar Project (Stratocaster). This guitar actually started it's life as a Fender Squire. I found it in a Guitar Center, and it had a ding in the front about 2-3 mm in diameter. I struck a deal with the salesman and brought it home and immediately dismantled it. Here is the original body before stripping it down. Heres another shot of the end grain. This had been leveled 2 times. In summary, I thought the advantages. Of using a french polish to be:. Inexpensive. I bought a...
acousticplayer.blogspot.com
Acousticplayer: October 2009
http://acousticplayer.blogspot.com/2009_10_01_archive.html
Sunday, October 18, 2009. Thursday and Saturday Class Week 7. This is a closeup of the brace being worked on. It is a slow process where you carve a little, tap the guitar, listen and begin removing more wood. Now is a good time to mention that your chisel is an important tool in this process. The ones at school were very dull. We did not really comprehend the issue until I purchased a set and sharpened them. WHAT A DIFFERENCE. This picture show the bracing around the sound hole. Obviously when you c...
acousticplayer.blogspot.com
Acousticplayer: August 2010
http://acousticplayer.blogspot.com/2010_08_01_archive.html
Monday, August 30, 2010. Add2 and add4 Pentatonic Scales. Pentatonic Major add4 - Pattern 1 - 5. Thursday, August 26, 2010. Ibanez SA Series - Neck. I first soak the inlay in a bowl of hot water to melt the adhesive. I now weight the cardboard down because if you don't the board will move as it absorbs water and the inlay falls off into a big pile which you get to sort out. This of course is a lesson from experience :-). All of the planning, measuring and scribing so that we can route! I won't go into al...
acousticplayer.blogspot.com
Acousticplayer: June 2010
http://acousticplayer.blogspot.com/2010_06_01_archive.html
Wednesday, June 30, 2010. I had refurbished a fender squier and gave it to my son. He had requested a different pickguard so I had the opportunity to take the guitar apart (again). While changing out a pickguard sounds easy, it did involve some time. Sunday, June 20, 2010. Test Board - French Polishing. My steps in French Polishing have been:. 1) Preparation (becoming a larger and larger part of the project). 2) Spit coats - usually 3 coats of French Polish applied. I used a thicker concentration. Still ...
acousticplayer.blogspot.com
Acousticplayer: Ibanez SA Series - Neck
http://acousticplayer.blogspot.com/2010/08/ibanez-sa-series-neck.html
Thursday, August 26, 2010. Ibanez SA Series - Neck. As usual I went through all different combination for weeks on end, but finally decided on the thorn vine. I like vines because they can be somewhat free form. You only have to really worry about the width and not if everything is square to the fret. The difficult part is there are a lot of pieces and trying to get them all to line up the same way more than once is very challenging. All of the planning, measuring and scribing so that we can route! I won...
acousticplayer.blogspot.com
Acousticplayer: May 2010
http://acousticplayer.blogspot.com/2010_05_01_archive.html
Monday, May 31, 2010. Maple Guitar Project (Stratocaster). This guitar actually started it's life as a Fender Squire. I found it in a Guitar Center, and it had a ding in the front about 2-3 mm in diameter. I struck a deal with the salesman and brought it home and immediately dismantled it. Here is the original body before stripping it down. Heres another shot of the end grain. This had been leveled 2 times. In summary, I thought the advantages. Of using a french polish to be:. Inexpensive. I bought a...
acousticplayer.blogspot.com
Acousticplayer: November 2007
http://acousticplayer.blogspot.com/2007_11_01_archive.html
Saturday, November 10, 2007. I am new to blogging, so please excuse me while I figure this out. I am hoping to create a central point for family and friends so that we can stay in touch and share photos and information. I am also hoping to create a music space where I can keep information related to playing and listening to music. Subscribe to: Posts (Atom). Great sites for working on your guitar. Milburn Guitars French Polish Tutorial. DePaul Supply (Inlay Designs). View my complete profile.
acousticplayer.blogspot.com
Acousticplayer: add2 and add4 Pentatonic Scales
http://acousticplayer.blogspot.com/2010/08/add2-and-add4-pentatonic-scales.html
Monday, August 30, 2010. Add2 and add4 Pentatonic Scales. Pentatonic Major add4 - Pattern 1 - 5. Subscribe to: Post Comments (Atom). Add2 and add4 Pentatonic Scales. Ibanez SA Series - Neck. Ebony Faced Electric Guitar. Great sites for working on your guitar. Milburn Guitars French Polish Tutorial. DePaul Supply (Inlay Designs). Lutheir Mercantile International (Wood, Tools and Supplies). Stewart McDonald (the Home Depot for Guitars). View my complete profile. Myers Family FFR Build. Progress on an OM.
acousticplayer.blogspot.com
Acousticplayer: September 2009
http://acousticplayer.blogspot.com/2009_09_01_archive.html
Tuesday, September 15, 2009. Then I took my sanding bit and sanded the sides in the block of wood until the piece slips in with a little pressure. This also has a distinct feel to it that I am starting to learn. Once your at that stage, I mix my epoxy, ebony shavings up and apply liberally, then push all the pieces in and clamp. After clamping and drying this is what it looks like in the morning :-). Saturday, September 12, 2009. Week 3 - Saturday Morning Class. So we began the process of replacing the s...
tonysbigbuild.blogspot.com
My Guitar build: Hello again. Check this out...
http://tonysbigbuild.blogspot.com/2010/01/hello-again-check-this-out.html
Monday, January 4, 2010. Hello again. Check this out. Above, you can see the whole guitar in all of its unlacquered glory. Here is a closer shot of the neck. One more pic for good measure. January 5, 2010 at 9:39 AM. I just glued and trimmed my top on and cut out the truss rod slot this weekend. How long did it take you to do the back bracing? Im planning to do that this week. Hoping it wont take as long as the top. Im obviously not there yet but does Ken recommend a finishing schedule? How does it sound?
